PTFE Tubes
The run from a sealed box to the extruder, cut to length.
₹299Inclusive of GST
● In stock · dispatch in 24–72 hours
Quantity
1
UPI and cards only — we do not currently offer Cash on Delivery.
About this product
Low-friction PTFE tubing, 2 mm bore and 4 mm outside diameter — the size a bulkhead port and a standard push-fit fitting both expect. It carries filament from a sealed box to the extruder without letting it pick up moisture on the way, and it is what wears out first on a setup that runs every day. Sold by the metre with two push-fit couplers, so you replace a run rather than a box.
What's included
- 2 mm bore, 4 mm outside diameter — the standard feed size
- Low-friction PTFE, so a spool turns against less drag
- Two push-fit couplers included with every length
- Cuts square with a tube cutter for a clean seat
Technical specifications
| Inner bore | 2 mm |
|---|---|
| Outer diameter | 4 mm |
| Material | Virgin PTFE |
| Couplers included | 2 |
| HSN | 3917 |
| GST | 18% |
FAQ
Measure from where the box will sit to the extruder inlet and add roughly 20% for the bend. A box beside the printer usually needs 1m; one under the bench or on a shelf, 3m.
Shipping, returns and warranty
Shipping — dispatched within 24–72 hrs, tracked courier
Returns — 7-day return window, unopened seal
Warranty — 6 months against gasket/buckle defects
Goes well with
₹249onwards
₹699onwards